Data View; Automatic Export; Update - FAG Detector III User Manual

4.16.5 Data view

Configuration
Click Configuration > Configure.
This opens the Configuration window of the Viewer. For further details, refer to
Viewer section "Program settings".

4.16.6 Automatic export

The Trendline software can automatically export data from CM measurements
as soon as the Detector receives them. It can automatically send the exported
data by e-mail or save them to a compressed ZIP file.
E-mail export
Click on Automatic to activate automatic export and subsequent dispatch by e-
mail.
Click on Only on alarms to carry out the automatic e-mail export only if the data
received from the Detector contains alarms.
File export
Click on Automatic to tell the software to export data automatically to a file.
Click on Only on alarms to perform the automatic file export only if the data
received from the Detector contains alarms.
In Default file name (.tr3) enter a name for the ZIP file to be saved. The file
name must include the ".zip" file suffix.
Select the storage location for the exported file at Default directory.

4.16.7 Update

Update settings
The Trendline software can check in user-defined intervals whether an update for
the Trendline of Detector firmware is available for download from our Internet
server.
Click on Update settings.
Configure the settings as described in "Automatic notification for updates
150
223
".
36