FAG Detector III User Manual page 184

Editing the HS cursor properties
In addition to the general cursor options described in Modify the cursor properties
you can also modify the options for the HS cursor (described below). To do
179
this, activate or deactivate the appropriate fields in the dialogue window or select
the respective value from the selection boxes.
Calculated harmonic
Nearest points
Number of nearest
points
Show coordinates
184
Switched off: the harmonics are identified using only the
corresponding cursor symbol.
In this field you can enter the number of harmonics that
must be calculated in each case.
Each harmonic is determined precisely using a
mathematical formula. You can enter the number of
nearest points to the left and right of the harmonic
identified to be analyzed for maximum values. The
highest value in each case is then labeled as a
harmonic and displayed.
Each sideband is also determined precisely using a
mathematical formula. You can enter the number of
nearest points to the left and right of the sideband
identified to be analyzed for maximum values. The
highest value in each case is then labeled as a
sideband and displayed.
Switched on the measured value for each harmonic
:
and sideband on the x- and y-axes is displayed at the
vertical line.
Switched off the measured values of the harmonics
: