Back Up Database; Bearing Database - FAG Detector III User Manual

If you delete a CM datab ase, all configuration and measured
data will b e removed irreversib ly!
You cannot interrupt the delete process!

4.5.7 Back up database

You can back up database(s) as follows:
To make a backup of a database, you have to detach the database from the
database server (see "Detach database"
Start Windows Explorer and choose the directory where the database files are
located.
Copy both the MDF and the LDF file of the database, which you want to back up,
to da different location.
For b ackup, it is essential that you copy b oth datab ase files!
Therefore always copy the MDF and the LDF file.

4.6 Bearing database

The Trendline database provides you with data on the most widely used bearings
for use in your individual configuration (see Setting up measuring point
You can also add your own bearings
Furthermore, the Trendline bearing database
administration feature
different makes that have similar characteristics.
Click Tools > Bearing database to open the bearing database.
Select the database as described in "Select database"
included bearing database is "CM_BEARINGS". If you set it up during software
installation, it is automatically opened when you call the bearing database for the
first time. The program uses the default user name and the default password.
The bearing database opens.
102
which you can use, for example, to group bearings of
106
).
98
to the existing bearing data.
104
also includes
93
).
58
a group
. The name of the