Database - FAG Detector III User Manual

Default configuration for time signals
Here you can configure when time signals should be saved with measurements.
Select "Never", "Always", "On main alarm" or "On pre-alarm".
If the "Always save" option is selected for more time signals in the
configuration that you wish to send to the Detector than are
permitted in the Detector memory an error message will b e output
and the data will not b e transferred. For more on this, see also
chapter "Frequency analysis" (see PDF "General information on
vib ration monitoring" on the delivered CD-Rom).

4.16.2 Database

History
Click History.
In the Number field you can adjust how many entries the list of recently opened
databases in the File menu will contain. The default value is 10.
Memory usage
Click on Memory usage.
The following information to the used database will be displayed:
- Name of database program
- Name of database server
- Name of database
- used space
- free space
The ratio of free to used memory is also presented as a diagram.
Database optimization
You should run the database optimization periodically. This helps to accelerate
the database access and minimizes the used space.
148
The displayed free space and the diagram can only
provide plausib le information when the datab ase and
datab ase server are installed on the same system.