FAG Detector III User Manual page 141

amplitudes.
Measuring point from a balancing configuration
If you export a measuring point from a balancing configuration, the Trendline
software saves a general export file with details on the configuration, the
balancing jobs and the weights. In addition, the program creates one file per
balancing step ("Data File<n>.csv") containing the associated sensor data.
The general export file contains the following details:
Heading
Data File
Balancing measurepoint
Job Number
App. weight 1 amplitude
App. weight 1 angle
App. weight 2 amplitude
App. weight 2 angle
comment
step_type_text
remove_weights_text
The sensor data files contain the following details:
Heading
Sensor position
Amp. Coeff. plane 1
Ph. Coeff. plane 1
Amp. Coeff. plane 2
Ph. Coeff. plane 2
Speed
Amplitude
Phase
Contents
Ex port file w ith the sensor data.
Name of measuring point
Number of the balancing job.
Amplitude of the w eight used in plane 1.
Position angle of the w eight used in plane 1.
Amplitude of the w eight used in plane 2.
Position angle of the w eight used in plane 2.
Measurement comment.
Ty pe of balancing step (reference run, trial run, etc.).
Indicates w hat w eights w ere remov ed.
Contents
Name of sensor position.
Amplitude of the coefficients in plane 1.
Angle of the coefficients in plane 1.
Amplitude of the coefficients in plane 2.
Angle of the coefficients in plane 2.
Rotational speed.
Amplitude of the v ibration.
Phase of the v ibration.
Trendline 3
141