Tree Elements - FAG Detector III User Manual

Menu Menu items and function
First steps
Menu bar
Toolbar
Info
Toolbar
Frequently used functions of Trendline software can be used via the toolbar.
Go to root lev el
Create new item
Create new sub-item
Add balancing configuration
Add amplitude/phase configuration
Add run up/coast dow n configuration
Ex pand selected element
Collapse selected element
Mov e selection up
Mov e selection dow n

4.2.2.3 Tree elements

In the system tree of the Trendline software you can cut, copy or delete
configuration elements.
Moving or copying configuration elements
You can only move configuration elements if the target is on a higher level, i.e. you
can
move or copy a measuring point (level 4) to another machine (level 3), and
move or copy a machine (level 3) to a different section (level 2).
Start using the Trendline Softw are.
Ex plains all menus of the Trendline Softw are.
Ex plains all icons in the toolbar.
Information about the Trendline Softw are.
Cut (Ctrl+X)
Copy (Ctrl+C)
Insert (Ctrl+V)
Delete
Reset alarm status
Send configuration to Detector
Send route/template to Detector
Dow nload data from Detector
Alarm report
E-Serv ice
Trendline 3
43