FAG Detector III User Manual page 86

The Run up/coast down measurements section displays the run up/coast down
measurements saved for the measuring point.
Limit time range
In order to limit the time range of the measured values displayed, select the
Time range option.
Set the desired start and end date.
Edit comment
In order to edit a measurement comment, click on the measurement and then
Edit comment.
Below the measurements the window is split into three sections. The amplitude/
phase diagram is displayed in the middle, with the diagram editing tools to the
left. To the right of the diagram there is a list of the user-defined frequency bands.
Displaying the amplitude/phase diagram and setting the frequency band
Click on a measurement to display the amplitude/phase diagram in the
diagram window.
You can use the FIS Viewer zoom tools described in the "FIS Viewer" section to
edit the diagram. Cursor tools for the diagram include the base cursor (see "
86