Add Bearing - FAG Detector III User Manual

4.6.2 Add bearing

To add a bearing to the bearing database
Select a manufacturer from the list.
Enter a name for the bearing in the Label field.
Detailed comments may be entered in the Comment field (optional).
Geometry data or damage frequencies
Use the Geometry and Frequencies options to switch between the input fields
in the right-hand area of the window in order to enter corresponding data.
When inputting the contact angle select either degrees or radians for units.
When specifying the frequencies enter whether these should be in Hz or rpm.
Trendline indicates whether any information still needs to b e input
in the b ottom right-hand area of the window. The b earing can b e
added to the datab ase only if all inputs are completed.
Click on Continue to store the bearing in the bearing database.
If you add or edit a b earing, it is imperative that you check the
plausib ility of these data. Ensure that you have entered the correct
values for the b earing data b ecause these are factored into the
calculation.
104
102 click on Add bearing.