Set Up Amplitude/Phase Configuration - FAG Detector III User Manual

Balancing report
Click on to generate a balancing report
Delete balancing data
To delete the data obtained during a balancing measurement
click the corresponding entry in the list then click
confirm deleting with Yes.

4.4.8 Set up amplitude/phase configuration

To create an amplitude/phase configuration,
click on a Level 3 configuration element (e.g. a machine or motor).
Then click System > Add amplitude/phase configuration.
General settings
RFID status
No RFID: No RFID tag is assigned to the measuring point.
Assign RFID: This option instructs the Detector to assign an RFID tag placed
on the machine to this measuring point during the next round.
RFID assigned: An RFID tag is assigned to the measuring point. The unique ID
76
.
133
and