Automatic Assignment Of Rfid Tags To Measuring Points - FAG Detector III User Manual

You can change the defaults for the level names in the settings
Setting up configuration elements
In order to create a new configuration, carry out the following steps:
Click on System > New item or click on
Name the entry, e.g. "Location Aachen".
Add the new sub-entry by clicking on System > New sub-item or click on
This way, you add a new section to the configuration. Name this "Section 1", for
example.
Exactly as with the section, add another machine ("Machine 1") and a new
measuring point ("Measuring point 1") by following the sequence via New sub-
item.
The name of the configuration element must not exceed 49
characters.
If you have set up templates, you can use them for your
configurations (see "Planning with templates and routes
Manage configuration elements
In the system tree of the Trendline software you can cut, copy or delete
configuration elements. You can find further information in the chapter "Tree
elements ".
43

4.4.2 Automatic assignment of RFID tags to measuring points

In order to simplify allocation of measuring points in the Trendline configuration to
measuring point in your system, you can add RFID tags to them. The Detector
can read existing RFID tags at the measuring points and automatically assign the
measured values to the correct measuring point in the Trendline software.
54
.
.
146
.
").
109