Send Configuration; Trendline Database - FAG Detector III User Manual

4.4.11 Send configuration

In the Trendline software You can send a configuration or a part of a configuration
to the Detector. For that, follow the sequence below:
Select a machine in the tree.
Connect the connector to the serial interface using the data cable.
Switch on the Detector.
Click on Detector > Send configuration or click on
The configuration for the machine for the selected machine, including all
measuring points, is sent to the Detector. If you want to send a complete
configuration, you would have to select the configuration in the tree (in the
example in paragraph "Setting up system tree"
1") prior to sending the data. It is even possible to send one measuring point.
This facility is mostly used for test purposes.
If the "Always save" option is selected for more time signals in the
configuration that you wish to send to the Detector than are
permitted in the Detector memory an error message will b e output
and the data will not b e transferred. For more on this, see also
chapter "Frequency analysis" (see PDF "General information on
vib ration monitoring" on the delivered CD-Rom).

4.5 Trendline database

About the Trendline databases
The data required for configuration and evaluation of data is stored centrally in the
Trendline database. The Trendline software is delivered with the MS SQL
Express 2005 database program, but the size of the database is limited to 4 GB
for licensing reasons. If you require more space in the database please consult
FAG Industrial Services GmbH.
The database program can be used to manage multiple database files. Each
database contains a MDF and a LDF file. For the sake of simplicity, individual
database files are referred to in this manual as "database".
Please note:
If you would like to attach, detach or update a database, use the database
administration that is provided and described in the following chapter.
If you would like to create or delete a database, you can do this directly from the
Trendline software. For more on this see "Create database"
database" ).
101
90
.
this would be "Cement Plant
53
/ "Delete
99