FAG Detector III User Manual page 208

measuring points are displayed in the diagram window, the display of
individual measuring points is automatically deactivated and only the diagram
of the function and not the measuring points remains visible.
2. Click on OK to apply these settings.
Active signal / 1st - 5th signal
Under the signal options you can modify the display of the individual signals.
1. Select a line type for the signal from the drop-down menu.
2. Specify a line width for the signal in pixels from the field provided.
3. Click on the palette to select a color for the signal.
4. Click on OK to apply these settings.
208
You can also apply these settings for additional signals.