FAG Detector III User Manual page 129

the scope and content of the measurement report:
Specifying a report time range
Select the Time range option to restrict the period that is reported.
Enter the start and end time. Alternatively, you can enter the end time and
specify the duration in whole days in the No. of days input field. In this case the
start time will be determined automatically.
Filter by comments
If you want to display measured data with a particular comment, select the
option Filter by measurement comments.
Enter the desired comment in the "Filter" field. You can use the wildcards "?"
and "*" in the usual way, e.g.
o "*Pump*" to find all measurements containing Pump or
o "?200*" to find all measurements whose comment includes the text "200" at
position 2-4.
Click on Enter to start filtering or click on Reload.
Alarm selection
Pre-alarms and main alarms can be displayed separately or together.
Click on Report all to select all alarms; to select individual alarm types click on
Report alarms or Report pre-alarms.
Select characteristic values
Under Char. values, select which characteristic values should be displayed.
Trendline 3
129