Nortel Communication Server 100 Manual page 153

letters with spaces (A space D) and [P] indicates a pause. Detailed
output of maintenance commands is explained in various maintenance
procedures in this chapter.
Table 27
MMI commands
Command Description
A D Alarm disable. Disables all local and remote carrier alarms. Maint LED lit.
A E Alarm enable. Enables all local and remote carrier alarms.
C A Clear alarm. Clears all local and remote carrier alarms.
C A L Clear alarm log. Clears near-end alarm log.
C A L D Clear alarm log distant. Clears far-end alarm log.
C E Clear error. Clears local and remote error counters for a all carriers.
C E D Clear error distant. Clears a far-end error counter for all carriers.
Display alarm log [pause]. Displays near-end alarm log with pause at full
D A L [P]
screen.
Display alarm log distant [pause]. Displays far-end alarm log with pause at full
D A D [P]
screen.
Display configuration. Displays current configuration of the Local and Remote
D C
Carrier Interface cards.
Display history [pause]. Displays near-end performance counters for a
D H [P]
specified carrier for the last 24 hours with full screen pause.
Display history distant [pause]. Displays far-end performance counters for a
D H D [P]
specified carrier for the last 24 hours with full screen pause.
Display performance. Displays near-end performance counters for a specified
D P
carrier for the current hour.
Display performance distant. Displays far-end performance counters for a
D P D
specified carrier for the current hour.
D S Display status. Displays near-end carrier status.
D S D Display status distant. Displays far-end carrier status.
HE or ? Help. Displays the help screen.
Connect the SDI port. Connects to the SDI port and @@@ terminates the
HOST
connection. The password is HOST.
L
Log in. Logs into the MMI terminal when the system has one Local Carrier
Interface card. The password is M1LINK.
Note: If logged in and you type L and an incorrect password, it will log you out.
Log superloop. Logs into a specific superloop when the system has more than
L sl one Local Carrier Interface card daisy-chained in the network module. The
password is M1LINK.
Nortel Communication Server 1000
Carrier Remote IPE Fundamentals
NN43021-555 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Diagnostic tools 153