Nortel Communication Server 100 Manual page 119

Table 23
To delete the configuration record for the Carrier Remote IPE module
(shelf)
REQ CHG
TYPE XPE
XPEC X2
To check the carrier status, loading the LD 32 and executing the STAT
<SUPC>, where <SUPC> is the Local Carrier Interface superloop number.
For additional examples of carrier status, refer to the Maintenance section,
Procedure 43 "Checking the carrier performance status" (page 176)
LD 32
NPR000
STAT sl
CARR
0
1
2
Parameter description:
CARR—Carriers 0, 1, and 2 (carrier 0 has priority over carrier 1 when
sparing carrier links)
CALS—Carrier Alarm Status (0 indicates Alarm Level 0 indicates no alarm)
TTSA—Timeslots currently available for voice and data (n/21 for T1 and
n/27 for E1)
NND—Indicates if No New Data is disallowed (NO = not disallowed)
SPARED Indicates if a carrier is spared (in the example none are spared)
and N/A indicates that carrier 2 is primary not spare
Nortel Communication Server 1000
Carrier Remote IPE Fundamentals
NN43021-555 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Configuring the Carrier Remote IPE 119
Change configuration record
Remote Carrier IPE
Delete configuration record for peripheral
controller 2, i.e., the Remote Carrier Interface
card
CALS TTSA
0 21/21
0
21/21
0
N/A
NND SPARED
NO NOT SPARED
NO NOT SPARED
N/A AVAIL