Nortel Communication Server 100 Manual page 118

118 Equipment installation and configuration
Table 20
Configuring the SDI port for the Local Carrier Interface card connection
(LD 17)
To enable the superloop for the Local Carrier Interface card and the
Remote Carrier Interface card, load Maintenance and Diagnostic Program
LD 32 and execute the ENLL x command.
Table 21
To enable the carrier superloop x
To remove the configuration of the Remote IPE superloop, load
Maintenance and Diagnostic Program LD 32 and execute the DISL x
command to disable the superloop, and then load Configuration Record
Program LD 97 to delete the configuration records of the superloop for the
Local Carrier Interface card and the Remote Carrier Interface card.
Table 22
To delete the configuration record for the carrier superloop
REQ CHG
TYPE CFN
IOTB YES
HIST
ADAN NEW TTY
0–15
USER BUG MTC
SCH
XSM (NO)
Response
Command
ENLL x ok & prompt
Prompt Response
REQ CHG
TYPE SUPL
SUPL X8
Nortel Communication Server 1000
Carrier Remote IPE Fundamentals
NN43021-555 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Change the SDI record
Configuration record
I/O terminal history file buffer length
Add, change, or remove an I/O device, type
aaa, or port x
Enter one of the output message types that will
be the message of this port
SDI port for the system monitor
Description
Enables specified superloop x
Description
Deleting the Local Carrier
Interface card configuration record
Carrier superloop
Remove record for superloop number 8