Nortel Communication Server 100 Manual page 185

Carrier remote ipe fundamentals
Table of Contents

Advertisement

If the LED stays on, go to
157)
10
Tag the defective cards with a description of the problem and
prepare them for shipment to the equipment supplier's repair
depot.
Reinstalling covers
When it is determined that the Carrier Remote IPE is operating correctly,
follow the steps in
reinstall the covers.
Procedure 48
Reinstalling the covers
Step
Action
1
Reinstall covers on the system module.
2
Reinstall the cover on the Remote IPE floor-standing module
or the wall-mounted (or pedestal-mounted) Carrier Remote IPE
cabinet.
3
Terminate your session with the system by logging out on
your maintenance terminal by typing LOGO at the . prompt (dot
prompt) and pressing the Enter key.
If using the MMI terminal, log out to complete the test and
troubleshooting session.
Packing and shipping defective cards
To ship a defective card to a Nortel repair center, follow the steps in
Procedure 49 "Packing and shipping defective cards" (page
Procedure 49
Packing and shipping defective cards
Step
Action
1
Tag the defective card with the description of the problem.
2
Package the defective card for shipment using the packing
material from the replacement card.
Place the card in an antistatic bag, into the box, and securely
close the box with tape.
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
in this chapter or replace the card.
Procedure 48 "Reinstalling the covers" (page 185)
Nortel Communication Server 1000
Carrier Remote IPE Fundamentals
NN43021-555 04.01 4 June 2010
Replacing Carrier Remote IPE cards 185
"Isolating and correcting faults" (page
--End--
--End--
to
185).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Communication Server 100 and is the answer not in the manual?

Table of Contents