Snmp-Based Management Interface Bitmask; Http Access - Avaya AP-3 User Manual

SNMP-Based Management Interface Bitmask

Configure the interface or interfaces (Ethernet, Wireless-A, Wireless-B,
All Interfaces) from which you will manage the AP-3 device via SNMP.
You can also select Disabled to prevent a user from accessing the AP-3
device via SNMP. Reboot the AP-3 for this setting to take effect.

HTTP Access

Several configuration options are available that restrict access to the Web
interface. Reboot the AP-3 for any changes to take effect.
• HTTP Interface Bitmap. Configure the interface or interfaces
(Ethernet, Wireless-A, Wireless-B, All Interfaces) from which you
will manage the AP-3 device via the Web interface. You can also
select Disabled to prevent a user from accessing the AP-3 device
from the Web interface.
• HTTP Port. Configure the HTTP port from which you will manage
the AP-3 device via the Web interface. By default, the HTTP port
is 80.
Avaya Wireless AP-3 User's Guide
Management Settings
4-29