Table of Contents
Advertisement
Dryer Temperature
Adjustment
Film-Feeding
Procedure
2B6841
[1]
Use the main menu to adjust the dryer temperature. You do not need to use
the access code. You may select a different dryer temperature for each cycle
and store them separately.
Always adjust the dryer temperature to the lowest possible
temperature that still allows good drying.
[2]
To change the dryer temperature press the:
• /\ key to increase the temperature
• \/ key to decrease the temperature
DRYER
Sheet Film: See Figure 9 on page 20 for the correct film-insertion procedure. Arrows
indicate the direction in which films are transported into the Processor. Choose either
the right or the left edge of the Feed Shelf, and always feed films square with that
edge of the Feed Shelf.
• Feed all single-sided films emulsion side up into the Processor,
aligning the film edge with the edge of the Feed Shelf.
• Align films consistently with either the right or left edge of the Feed Shelf.
• Do not pull back films after you feed them into the Processor.
• Do not pull on film as it exits the Processor.
• Do not allow too many sheets of films to accumulate in the receiving bin at
one time.
IMPORTANT
|
|
|
/\
\/
SELECT
|
|
|
DRYER
CYCLE
|
DISPLAY
GO TO
|
FIX TEMP
SETUP
19
Advertisement
Table of Contents
