Adjusting The Tension Of The Dryer Belt - Kodak RP X-OMAT M6B Installation Instructions Manual

Adjusting the Tension of the Dryer Belt

Parts are moving within the processor. Keep hands and loose clothing out of the processor.
[1] With the processor operating, the DRYER TEMPERATURE CONTROL rotated to the full
counter-clockwise
[2] Loosen the LOCKING SCREW.
[3] Rotate the ADJUSTING SCREW KNOB to tighten the BELT until the ROLLERS just begin to rotate.
[4] Rotate the ADJUSTING SCREW KNOB an additional 1 rotation.
[5] Tighten the LOCKING SCREW.
[6] Tighten the ADJUSTING SCREW LOCK NUT.
AIR
TUBE
246626
position, and the dryer cool, adjust the tension of the DRYER BELT as follows:
BELT
LOCKING
SCREW
ADJUSTING
SCREW LOCKNUT
ROLLER
ASSEMBLY
Figure 44 Locating the Dryer Belt and Adjuster
ADJUSTING
SCREW KNOB
H048_0093BCA
H048_0093BA
45