Introduction; The Display Panel; Using The Display Panel; Adjusting The Contrast Of The 300 Circuit Board Display (Display Panel) - Kodak X-Omat 460 RA Operator's Manual

The Display Panel

Using the Display
Panel
BACKLIT
MESSAGES
Adjusting the
Contrast of the 300
Circuit Board Display
(Display Panel)
Press to
Darken Display
636736
You may select, change, and monitor processing variables for the Kodak X-Omat
460 RA Processor by using the display panel, Figure 1 below.
LIQUID CRYSTAL
DISPLAY
SOFT KEY (5)
Figure 1 Display Panel
[1] To darken the display, press and hold the fourth SOFT KEY on the DISPLAY
PANEL. At the same time, press the first SOFT KEY on the DISPLAY PANEL
as necessary to obtain the desired contrast.
[2] To lighten the display, press and hold the fourth SOFT KEY on the DISPLAY
PANEL. At the same time, press the second SOFT KEY on the DISPLAY
PANEL as necessary to obtain the desired contrast.
Press to
Lighten Display
Figure 2 Adjusting the Brightness of the 300 Board Display

Introduction

DEVELOPER TEMPERATURE
DISPLAY
DEGREE C/F
LED INDICATORS
Press and Hold to
Change Contrast
ROOM LIGHT
SENSOR
REPLENISHMENT
INDICATOR
H104_0080BCA
H104_0080BA
H104_0080BCB
H104_0080BA
3