[2] Remove:
• TOP COVER
• 2 SCREWS
• 2 LOCK WASHERS
• 2 WASHERS
• DETECTOR SWITCHES
• WIRE TIES, not visible in graphic
ESD
Possible damage from electrostatic discharge.
[3] Disconnect the SWITCH CABLE from the ELECTRICAL BOX.
[4] Connect the new SWITCH CABLE to the ELECTRICAL BOX.
[5] Install:
• DETECTOR SWITCHES
• 2 WASHERS
• 2 LOCK WASHERS
• 2 SCREWS
• new WIRE TIES
• TOP COVER
Warning
Dangerous Voltage
[6] Connect the PROCESSOR to the main power.
[7] Do the adjustment procedure for the DETECTOR SWITCHES. See Page 5.
CROSSOVER AY
Adjustment for Squareness
[1] Remove the CROSSOVER AY from the PROCESSOR.
[2] Place the CROSSOVER AY on a smooth, flat surface with the GUIDE SHOES up.
SIDE
PLATE
2 GUIDE SHOE
SCREWS
TIE ROD
7C8772 – 12JAN99
LONG TIP
Adjustments and Replacements
TIE ROD
NUT
NUT
SIDE PLATE
H172_1038BCA
H172_1038BA
7