Load From File; Service Test - Micromeritics Gemini VII 2390a Operator's Manual

Gemini VII

Load from File

Unit [n] > Calibration > Load from File
Use to load a previously saved calibration file.
It is recommended that the current calibration settings be saved using Unit [n] > Calibration > Save to
File prior to loading another calibration file. When loading a previously saved calibration file, a
backup of the current file is created and saved as [SN]last.cal. The backup file is overwritten each time
a new one is created.

Changing the calibration may affect the instrument's performance.

Service Test

Unit [n] > Service Test
Use for service tests performed only with the assistance of a trained Micromeritics service representa-
tive. These tests provide the service representative with troubleshooting tools and readouts.
This option is enabled only when the analysis program is operating in Service Test mode. Refer to
Mode, page 8-4.
Service Test
239-42828-01 - Dec 2012
Service Test
6-23