2500 Series - Micromeritics Gemini VII 2390a Operator's Manual

Gemini VII
2499- Sequence number must contain at least 3 digits.
Cause:
Action:

2500 Series

2500- All sample file names that can be created using the sequence number pattern
already exist. You may want to modify the next sequence number.
Cause:
Action:
2505- Error logger cannot be initialized. Error code [n]. Program will exit.
Cause:
Action:
2506- Sample file [file name] has a 'No Analysis' status and cannot be used for this
operation.
Cause:
Action:
2508- [sample file] Overlay file [name] was not found. It will not be included in the
reports.
Cause:
Action:
2509- [sample file] Error opening file [name] [error]. Reports cannot be produced.
Cause:
Action:
239-42828-01 - Nov 2013
An attempt was made to enter a sequence number that did not contain
at least three digits.
Enter a sequence number that contains at least three digits.
No more sample information files can be created using the currently
entered file name sequence number.
Select Options > Sample defaults and enter another sequence
number.
An internal processing error has occurred.
Contact a Micromeritics service representative if this error message
continues.
The selected sample file does not have collected data and cannot be
used for operations, for example, reporting.
Enter the name of a file with a status of Complete, Analyzing or
Entered or select a sample file from the list box.
The specified overlay file could not be found.
Ensure the file specified as an overlay exists.
An error occurred while the program was opening a file necessary to
the report operation.
Use the name given in the error message to investigate. Contact a
Micromeritics service representative if this error message continues.
Appendix B
B-7