Tabular Report Options - Micromeritics Gemini VII 2390a Operator's Manual

Report Options Files
Field or Button
Pressure Range button Click to enter minimum and maximum relative pressures.
Cancel button
Edit button
OK button

Tabular Report Options

Highlight BJH Tabular Report in the Selected Reports list box and click
of data reduction.
Field or Button
Fixed pore size table
Collected points
5-38
If Use calculation assignments is not selected on the Analysis
Conditions window, all of the non-outlier points of the collected data
within the specified range are used for calculating the data for this report.
If Use calculation assignments is selected, collected data points assigned
to this report type are used.
Refer to
Common Fields and Buttons - File Menu
Select to specify exact pore sizes for volume or area data.
Click the Table button to modify the fixed pore size table. Reference
Table and Columns below for information on the use of these buttons.
Select to include all relative pressure points collected. Reference the
Columns button referenced below.
Description (continued)
Edit
Description
Gemini VII
Options, page 5-1.
to specify the method
239-42828-01 - Dec 2012