6000 Series - Micromeritics Gemini VII 2390a Operator's Manual

Appendix B
4405- Fatal communications error with SmartPrep Unit [n] - S/N: [nn].
Cause:
Action:

6000 Series

6000- An error occurred while loading the application control information. Data entry
cannot be performed. [Code number]
Cause:
Action:
6008- The sample has an invalid status and cannot be used for this analysis.
Cause:
Action:
6023- Desorption points in this sample file cannot be processed by this instrument.
Continue with adsorption points?
Cause:
Action A:
Action B:
6024- Some selected reports are invalid for this instrument.
Cause:
Action:
B-22
There was a fatal error in the serial communications between the
application and the SmartPrep Instrument Controller. All displays for
that SmartPrep will be closed.
Ensure that the SmartPrep is properly chained to the computer on the
communications port configured in the Setup program. Stop and re-
start the application. Contact a Micromeritics service representative if
this error message continues.
An error occurred accessing the control information disk file required
by this application.
The disk drive may have failed or be corrupt. Run diagnostics on the
disk drive.
A sample file with a status other than No Analysis or Prepared was
selected.
Select a sample file with a status of No Analysis or Prepared.
The selected sample file in this analysis has desorption points
selected in the pressure table. The analyzer (Gemini 2390a or 2390p)
cannot report desorption data.
Click Yes to continue with the analysis and report adsorption data
only.
Click No to choose a different file, or to edit the current file.
If using a Gemini 2390t, select Start Analysis for that unit.
The requested report cannot be generated with the Gemini 2390a.
Edit the report selections on the Report Options window.
Gemini VII
239-42828-01 - Nov 2013