Micromeritics Gemini VII 2390a Operator's Manual page 272

Appendix B
2489- File [file name] cannot be opened for writing. It is already in use.
Cause:
Action:
2490- No '.INI' file present. Application will terminate.
Cause:
Action:
2491- Highlighted fields contain errors. Please correct the errors before closing dia-
log box.
Cause:
Action:
2492- This field's entry is invalid.
Cause:
Action:
2493- An entry is required for this field.
Cause:
Action:
2494- Value is out of the valid range.
2496- Invalid number.
Cause:
Action:
2497- This field contains an invalid character.
Cause:
Action:
B-6
The specified file in a Save As operation is already open for edit.
Select a different file for the Save As operation.
The ASCII file containing initialization information and system
options information used during program startup does not exist.
Run the analyzer setup program, select Change analyzer setup and
create the control file used by the analyzer.
The highlighted fields contain invalid entries. The dialog box cannot
be closed until all errors are corrected.
Check the entries, correct the errors and close the window.
The highlighted field contains an invalid entry.
Check the entry and correct the error.
This field requires a valid entry to proceed.
Enter or select an appropriate value.
An invalid number entered in the highlighted field.
Check the entry and enter or select a valid number.
An invalid character was entered in the highlighted field.
Check the entry and enter valid characters.
Gemini VII
239-42828-01 - Nov 2013