File Menu; Introduction; Common Fields And Buttons - File Menu Options - Micromeritics Gemini VII 2390a Operator's Manual

Gemini VII

Introduction

This chapter contains information specific to the File menu options used to manage sample and param-
eter files. This chapter provides details of File menu options, commonly used functions and buttons,
and field descriptions.
Menu bar
Common field and button descriptions are listed in a Common table at the beginning
of their respective chapters. Field and button descriptions not listed in the Common
table are listed in their appropriate heading.
Refer to the Appendix section of this manual for further details on report calculations
CALCULATIONS, page
(

Common Fields and Buttons - File Menu Options

The following fields and buttons are common to many of the File Menu windows. Field and button
descriptions not listed below are found in their respective sections
Field or Button
Autoscale checkbox
Axis Range
239-42828-01 - Dec 2012

5. FILE MENU

Arrow indicates
submenu
C-1 ) and DFT models (
When working with report parameters screens, when enabled, allows the X-
and Y-axes to be scaled automatically.
When working with report parameters screens, the From / To fields are
enabled when Autoscale options are not selected. Enter the starting and
ending values for the X- and/or Y-axes.
MODELS, page
DFT
.
Description
Introduction
F-1 ).
5-1