Micromeritics Gemini VII 2390a Operator's Manual page 268

Appendix B
2433- New entries have been found in this directory. Refresh the directory
information?
Cause:
Action:
2434- File [file name] — Subset # [n] wrote wrong amount of data.
Cause:
Action:
2436- Path specification [path name] is invalid.
Cause:
Action:
2437- File/Overlay file [file name] does not exist.
Cause:
Action:
2439- Could not register file.
2440- Subset not found.
2441- Seek within file failed.
2442- Bad header in subset file.
2443- Subset owner denied access.
2444- Not a valid file format.
2445- Subset wrote the wrong amount of data.
2446- Error reading data.
2447- Error writing data.
Cause:
Action:
B-2
Several analyzer files (sample information, analysis conditions,
adsorptive properties or report options) have been added to this
directory by some function other than the analyzer program.
Select Yes to update the directory information with data from each
new file. This operation may take a minute.
Select No to locate the file manually. This option may be feasible if a
large number of files have been copied into the directory and the
name of the file is known.
An internal processing and/or hardware error has occurred.
Contact your service representative if you continue to receive this
error message.
An invalid path name and/or extension was entered.
Type a valid path name (including the proper extension) and press
Enter.
The entered file specification does not exist.
Enter an existing file specification or select a file name from the list
box.
An unexpected error occurred when trying to access a data file.
Contact a Micromeritics service representative if this error message
continues.
Gemini VII
239-42828-01 - Nov 2013