Enable Manual Control - Micromeritics Gemini VII 2390a Operator's Manual

Enable Manual Control

Enable Manual Control
Unit [n] > Enable Manual Control
Use to enable the manual control of certain system valves and elevator components. When this option
is enabled, a checkmark appears to the left of the menu item. Enable this option by selecting Enable
Manual Control on the menu.
If the following instrument schematic is not immediately visible, select Unit [n] > Show Instrument
Schematic.
Field or Button
Open Sample File
button
Start Report button
Start Analysis button
QuickStart Analysis
button
SPC Control Chart
button
6-8
Click to open the Open Sample Information File window.
Click to open the Start Report window.
Click to display the Analysis window.
Click to display the QuickStart Analysis window.
Click to display the Control Chart window.
Po tube, valve, and
transducer reading not
displayed for Model 2390a.
Description
239-42828-01 - Dec 2012
Gemini VII