Moving An Analyzer From One Pc To Another Pc - Micromeritics Gemini VII 2390a Operator's Manual

Installing the Software
5. The Analyzer Added screen displays. Click Finish.

Moving an Analyzer from One PC to Another PC

This section provides instructions on moving a configured analyzer (along with its status, calibration,
and log file) from one computer (Source PC) to a another (Destination PC). This operation does not
move sample or parameter files. Use a file management program such as Explorer or a backup/restore
utility to move these types of files.
1. Ensure the analyzer program is installed on the destination computer. If this is a new install, refer
to
Installing the
2. Start the setup program on the Source computer. On the Welcome screen, click Next.
4-16
Software, page and select '0' as the number of analyzers to be installed.
4-2
Gemini VII
239-42828-01 - Dec 2012