Micromeritics Gemini VII 2390a Operator's Manual page 96

Installing the Software
5. On the new Move Analyzer screen, select the new destination for the analyzer to be moved. This
location is where the Analyzer SN [n] Installer.exe file will be located. To accept the default
location, click Next or click Browse to select a new destination, then click Next.
6. The analyzer serial number [n] files are moved to the install program and the Analyzer Installer
Created screen displays. Click Finish.
a.) Remove the CD from the CD-ROM drive and store in a safe location.
b.) Disconnect the Ethernet cable from the Source computer and reconnect it to the configured
Ethernet port on the Destination computer. If moving the analyzer to a computer that already
has an analyzer attached, an Ethernet switch is required.
c.) If the move destination was a local drive, navigate to the drive and copy the Analyzer SN [n]
Installer.exe file to a media device such as a USB stick. Install the file on the destination
computer, then double-click the Analyzer SN [n] Installer.exe file.
If the move destination was a network drive, navigate to the location then double-click the
Analyzer SN [n] Installer.exe file.
4-18
Gemini VII
239-42828-01 - Dec 2012