Micromeritics Gemini VII 2390a Operator's Manual page 275

Gemini VII
2515- Warning: Changing the calibration information will affect the performance of
the instrument. Only qualified service personnel should do this. Do you wish to
proceed?
Cause:
Action:
2516- Warning: Keeping a backup copy of the calibration data is recommended by
Micromeritics. Would you like to do so now?
Cause:
Action:
2517- Canceling this dialog will reset the calibration state to what it was when this
dialog was first opened. Are you sure you want to cancel?
Cause:
Action:
2520- No data points available for reporting.
Cause:
Action:
2522- Invalid controller application file.
Cause:
Action:
2532- The instrument contains a different software version. Do you want to reset it?
Cause:
Action:
239-42828-01 - Nov 2013
The process of performing a calibration operation was started.
Calibration operations should only be done by or under the direction
of qualified service personnel.
A calibration operation was performed and a backup copy is
recommended.
Perform a calibration Save operation.
The calibration has not been accepted.
If the calibration operation was successful, press Accept.
The selected sample file does not have collected data and cannot be
used for reporting.
Select a different sample file.
The application's control file has been corrupted or deleted.
Reinstall the analysis program.
The application has discovered a different version of software
operating in the analyzer.
If there are no analyzers other than the Gemini connected to the
computer, select and allow the updated software to load.
Yes
Appendix B
B-9