Micromeritics Gemini VII 2390a Operator's Manual page 271

Gemini VII
2482- File cannot be opened for writing. It is already in use.
Cause:
Action:
2483- An analysis cannot be performed on [file name]. It is open for editing and con-
tains errors.
Cause:
Action:
The edit session for [file name] must be saved before the analysis. Save 
2484-
changes and continue with the analysis? [Yes, No]
Cause:
Action:
2486- Could not construct [name] report type. Program will terminate.
Could not start report generator. Error code [n]. Program will 
2487-
terminate.
Cause A:
Action A:
Cause B:
Action B:
2488- File [file name] cannot be opened for editing. It is already in use.
Cause:
Action:
239-42828-01 - Nov 2013
An attempt was made to open a file currently being used.
Locate the application using the file (in the Micromeritics application,
use the Windows menu item to get a list of all windows, one of which
may contain this file).
An attempt was made to use a sample file containing errors that is
currently open.
Go to the window containing the file, correct the errors and save it.
An attempt was made to start an analysis using a file that contains
unsaved changes and is open for editing.
Select Yes to save the changes and proceed with the analysis. Select
No to cancel the analysis and continue editing the Sample
Information file.
Full rights to the application's folders and files is required.
Contact a system administrator to have full rights granted.
An internal processing and/or hardware error has occurred.
Contact a Micromeritics service representative if this error message
continues.
The specified file is being used in another edit operation.
Check the Windows list to locate the other edit session.
Appendix B
B-5