Micromeritics Gemini VII 2390a Operator's Manual page 44

Defining Sample Information Files
5. In the Mass group box, enter default values for the sample's mass and density. Both of these
values may be edited at the time of analysis. Refer to
6. Click the dropdown arrows to select default parameter files for Degas conditions, Analysis
conditions, Adsorptive properties, and Report options.
If there is an existing sample file containing the values to be used in the current sample
file, click Replace All to choose the file and copy the values into the current file.
7. Click Save, then click Close.
3-8
Files, page 5-8.
Sample Information
239-42828-01 - Dec 2012
Gemini VII