Load From File; Service Test - Micromeritics ASAP 2460 Operator's Manual

ASAP 2460 Operator's Manual

Load from File

Unit [n] > Calibration Data > Load from File
Use to load a previously saved calibration file.
It is recommended that the current calibration settings be saved using Unit [n] > Calibration > Save to
File prior to loading another calibration file. When loading a previously saved calibration file, a
backup of the current file is created and saved as [SN]last.cal. The backup file is overwritten each time
a new one is created.

Changing the calibration may affect the instrument's performance.

Service Test

Unit [n] > Service Test
Use for service tests performed only with the assistance of a trained Micromeritics service representa-
tive. These tests provide the service representative with troubleshooting tools and readouts.
This option is enabled only when the analysis program is operating in Service Test mode. Refer to
Mode, page 6-5.
Service Test
246-42800-01 - Aug 2013
Service Test
4-35