Basic Format - Micromeritics Gemini VII 2390a Operator's Manual

Specifying Sample Defaults

Basic Format

When specifying defaults in the Basic format, select from existing default parameters. The defaults
established in Basic format also serve as defaults for files created using the Restricted format.
To define parameter files before entering sample defaults in Basic format, refer to
Files, page 3-6.
Information
Perform the following steps to establish defaults for a sample information file in the Basic format.
1. To change to Basic format, go to Options > Option Presentation > Basic.
2. Go to Options > Sample Defaults.
3. In the Sequence Number alpha/numeric text box, specify a default file name string. The
Sequence Number field must contain a minimum of three (3) numbers. This number is
incrementally sequenced and displays in the File name text box in the File > Open > Sample
Information window.
4. The text box to the right of the Sample field, is used to enter a format for the sample
identification. Include the $ symbol to automatically include the Sequence Number field text as
part of the sample identification.
The field label for the Sample field can be modified by overwriting the default field label.
5. In the Mass group box, enter default values for the sample's mass and density. Both of these
values may be edited at the time of analysis. Refer to
3-4
Defining Sample
Files, page 5-8.
Sample Information
239-42828-01 - Dec 2012
Gemini VII