Load Quickstart Degas Conditions Into A Sample File - Micromeritics Gemini VII 2390a Operator's Manual

3 Operate the Smart VacPrep
10. Install the safety shield.
11. Press the Select button for the port to be degassed. A blue LED is lit.
12. Press the Start button on the Smart VacPrep panel to start the degas process for all ports that
have a blue LED lit.
13. When degassing is complete and the sample has cooled, the sample can be transferred to an ana-
lysis port.
L Q S
OAD UICK TART
QuickStart Degas Conditions can be copied into a sample file. Reference the Degas Conditions section
of the analyzer Operator Manual.
Degas Conditions Fields and Buttons Table
Field or Button
Close
Copy QuickStart Degas
Conditions from the
Smart VacPrep Unit
Degas Conditions
Heating Phase
3 - 4
D C
EGAS ONDITIONS INTO A
Description
Closes the active window.
Use to copy the degas conditions settings from the selected Smart
VacPrep unit and port.
Use to browse for a .DEG file that contains degas condition parameters
to be used in the analysis.
This option is applicable when degassing with either a Smart VacPrep or
a SmartPrep.
Enter up to five stages of degas conditions.
Temperature. Degas temperature.
l
Temperature Ramp Rate. Rate at which the temperature is to
l
change.
Time. Amount of time to heat the sample.
l
Use to modify the table contents.
Insert. Inserts one row above the selected row.
l
Delete. Deletes the selected row.
l
Clear. Clears all table entries and displays only one default value.
l
Append. Inserts one row at the end of the table.
l
S F
AMPLE ILE
Smart VacPrep Operator Manual