Micromeritics Gemini VII 2390a Operator's Manual page 418

Hide thumbs Also See for Gemini VII 2390a:

Table of Contents

6 Maintenance and Troubleshooting

3. Remove and discard the exhaust filter. Ensure the centering ring remains in place on the exhaust

4. Place the new filter on the centering ring.

5. Open the clamp and place it around the exhaust port flange and the exhaust filter flange. Swing

the clamp fastening screw toward the exhaust port until it fits into the slot in the other half of the

clamp. Tighten the wing nut securely by hand.

6. Turn on the power to the pump.

Chapters

Table of Contents

Do you have a question about the Gemini VII 2390a and is the answer not in the manual?

Gemini vii 2390t Gemini vii 2390p