How To Roll Offscreen Data - Agilent Technologies 1660A Series User Reference

How to Roll Offscreen Data

If there is offscreen data, it must be rolled back onscreen before it can be
viewed or acted upon. The types of data you typically find located offscreen
are Labels, Pods, Terms, Sequence Levels, and data listings. Each of the data
types have a roll field. These roll fields indicate offscreen data by becoming a
dark selectable field with small arrows showing the direction the data is
rolled. In addition, a roll indicator appears that indicates which rollable field
is currently active.
There are two ways to roll data. One is with the knob, the other is with the
Page keys. The following exercise demonstrates both ways by first having
you assign enough data to create offscreen data, then rolling the data.
Using the Knob
Press the analyzer
1
Press the
2
the Unassigned Pods list, then press the
Press the
3
the custom name for Analyzer 1 as shown below, then press the
key
You should now have pod pairs A1/A2 and A3/A4 assigned to Analyzer 1.
Analyzer 1
Configuration menu
MENU key.
Config
arrow keys to move the cursor to the A3/A4 pod pair field in
Up/Down arrow keys or rotate the knob to move the cursor to
.
Using the Front-Panel Interface
How to Roll Offscreen Data
key.
Select
Select
3–23