Table of Contents
Advertisement
Probing
This chapter contains a description of the probing system for the logic
analyzer. It also contains the information you need for connecting the
probe system components to each other, to the logic analyzer, and to
the system under test.
Probing Options
You can connect the logic analyzer to your system under test in one of
the following ways:
•
Agilent Technologies 10320C User-Definable Interface (optional).
•
Microprocessor and bus specific interfaces (optional).
•
Standard general-purpose probing (provided).
•
Direct connection to a 20-pin, 3M-Series type header connector
using the optional termination adapter.
The 10320C User-Definable Interface
The optional 10320C User-Definable Interface module combined with
the optional Agilent Technologies 10269C General Purpose Probe
Interface allows you to connect the logic analyzer to the
microprocessor in your target system. The 10320C includes a
breadboard that you custom wire for your system.
Another option for use with the interface module is the Agilent
Technologies 10321A Microprocessor Interface Kit. This kit includes
sockets, bypass capacitors, and a fuse for power distribution. Also
included are wire-wrap headers to simplify wiring of your interface
when you need active devices to support the connection requirements
of your system.
See Also
Accessories for Agilent Logic Analyzers for additional information
about the interface module and the microprocessor interface kits.
2–2
Advertisement
Table of Contents
