Table of Contents
Advertisement
Error Messages
Warning Messages
Warning Messages
Waiting for Prestore. This message is displayed for a timing analyzer
waiting for prestore.
Search failed - X pattern not found. The X pattern specified could
not be found, therefore the pattern marker could not be placed in the
data.
Search failed - O pattern not found. The O pattern specified could
not be found, therfore the pattern marker could not be place in the data.
Warning: Run HALTED due to variable change. This message
appears when certain analyzer settings are changed during a repetitive
run. When this occurs, the analyzer stops.
Compare not available - Insufficient Memory. There is not enough
memory available to store a compare image.
Error not found. The Find Error number specified in the Compare
mwnu could not be found.
s/Div set to limit. The s/Div field is set to it's limit.
Delay set to limit. The Delay field is set to it's limit.
Machine name: "ial name" inverse assembler not found. This
message appears when the inverse assembler file could not be found.
Data was acquired without time tags Time tag values will not be
displayed because data was stored without time tags. If you want time
tags stamped on the data, set Count in the Trigger menu to Time.
Data was acquired without state tags State tag values will not be
displayed because data was stored without state tags. If you want state
tags stamped on the data, set Count in the Trigger menu to State.
Count Time/States not available when in 8K Memory Mode.
When the state mode is changed to Half Channel/8K mode, the time or
state tags are not available.
18–5
Advertisement
Table of Contents
