Table of Contents
Advertisement
The Waveform Menu
Marker Label / Base and Display
Display Location Reference Line
At the bottom of the Waveform menu is a reference line which
displays the relative location of the display window, the markers, and
the trigger point with reference to the total memory.
Total memory is represented by a horizontal dotted line. The display
window is represented by an overlaid solid line. The markers and
trigger point are represented by small dots above the total memory
line, and an X, O, and t label, all of which are located below the total
memory line. See the figure below.
As you change settings such as delay, sec/Div, states/Div, trigger point
and marker placement, all the relative positions change within the
Display Location Reference Line.
Display Location Reference Line
14–35
Advertisement
Table of Contents
