Using the Front-Panel Interface
Front-Panel Controls
Hexadecimal Keypad
The hexadecimal keypad allows you to enter numeric values in numeric entry
fields. You enter values in the four number bases Binary, Octal, Decimal, and
Hexadecimal. The A through F keys are used for both hexadecimal and alpha
character entries.
Alpha Keypad
The alpha keypad allows you to enter letters in alpha entry fields. You enter
letters in fields where a custom name is desired.
Disk Drive
The disk drive is a 3.5 inch, double-sided, double density drive. Besides
loading the operating system, it allows you to store and load logic analyzer
configurations and inverse assembler files. There is a disk eject button
located on the right side. Press this button to eject a flexible disk from the
disk drive. The disk drive also has an indicator light. This light is illuminated
when the disk drive is operating. Wait until this light is out before removing
or inserting disks.
On 1664A analyzers, the operating system is not contained on ROM inside of
the unit, and MUST be loaded from disk when the 1664A is powered up.
Simply insert the operating system disk into the disk drive, then set the LINE
switch to ON.
3–7