How To Select The System Menus - Agilent Technologies 1660A Series User Reference

How to Select the System Menus

One of the six MENU keys is the System key. You use the System key to
access a set of menus that are used to configure system level parameters for
the I/O bus, clock, display, and the disk drive operations. To access the
menus under the System key, perform the following steps:
Press the
1
System key
Press the
2
Select
Press the
3
System menu name as shown below, then press the
1660A through
1663A shown.
1664A displays
"Printer/Controller"
System menu
Selection List
System Menus Selection List
MENU key.
System
arrow keys to highlight the menu Name field, then press the
key.
Up/Down arrow keys or turn the knob to highlight the desired
Menu name field
Using the Front-Panel Interface
How to Select the System Menus
Select key.
3–13