The Waveform Menu
Seconds Per Division Field (Timing only)
Seconds Per Division Field (Timing only)
When the analyzer Type field in the Configuration menu is set to Timing, the
analyzer uses its own internal clock. In this mode, the X-axis of the
waveform display is measured in seconds per division.
You use the sec/Div field to select the seconds per division resolution of the
X-axis. The range of the sec/Div field is 1 ns/Div to 1.0 ks/Div. You set the
sec/Div field by either selecting the sec/Div field and rotating the knob, or by
highlighting the sec/Div field and entering a value using the front-panel
keypad.
When using the knob to set the sec/Div, the value will change in a 1-2-5
sequence. By adjusting the sec/Div, you can zoom in to view a desired part of
the display.
Seconds per
division field
Seconds Per Division Field
14–8