Using the Front-Panel Interface
How to Use Assignment/Specification Menus
Specifying Edges
Certain assignment fields require edge assignments to be specified. An edge
can be specified in any one of the available number bases.
You can select positive-going ( ↑ ), negative-going ( ↓ ), either edge ( ↕ ) or
.
no edge (
).
To specify an edge, perform the following exercise:
Press the analyzer
Trigger
1
Press the
keys to move the cursor to the Edge 1 assignment
2
arrow
field as shown, then press the
Edge and Glitch Assignment Field
3–28
MENU key.
Select
key.
Edge assignment
field