Pattern Markers
When Pattern markers are selected, two markers labeled X and O
become available. Pattern markers identify and mark unique bit
patterns in the data listing. Once the unique bit patterns are marked,
they can be used as reference points or as criteria for a stop
measurement.
The markers are graphically displayed by horizontal lines. In addition,
both markers are labeled at the left end of the marker line.
When a marker is positioned in the Listing menu, it is also positioned
in the Chart menu and Waveform menu.
See Also
"Specify Patterns Field" found later in this chapter for more information on
creating a pattern for the X and O markers.
13–5