Table of Contents
Advertisement
The Configuration Menu
Activity Indicators
Activity Indicators
A portion of the Configuration menu that is not a selectable field is the
Activity Indicators. The indicators appear in two places. One is in the pod
pair displays of this Configuration menu. The other place is in the bit
reference line in the Format menu just above the pod bit numbers.
When the logic analyzer is properly connected to an active target system, you
will see a high-level dash, a low-level dash, or a transitioning arrow in the
Activity Indicator displays for each pod pair. These indicators are very useful
in showing proper probe connection and that the logic levels are as expected
according to the threshold level setting.
See Also
"Bit Assignment Field" in the Format menu chapter for more information on
the activity indicators in the Format menu.
Activity indicators
Activity Indicators
10–7
Advertisement
Table of Contents
