Stop Measurement Field - Agilent Technologies 1660A Series User Reference

Stop Measurement Field

The Stop measurement function allows you to specify a condition which
stops the analyzer measurement during a repetitive run.
When the Stop measurement field is selected, a stop measurement type
menu appears. Depending on the analyzer configuration, you have the
choices of Off, X-O, and Compare.
Off
The Off selection turns all Stop measurement operations off.
If the Stop measurement operation is not turned off and Stop measurement
criteria are met, the measurement will stop even though the markers are off.
Stop measurement
field
Stop Measurement Field
Stop measurement type selection menu
The Chart Menu
Stop Measurement Field
16–19